Orthopaedic surgery depends on precise positioning. When a surgeon fixes a fractured femur, hip or tibia, the bone must be aligned correctly and held steady while the implant is placed and checked with imaging. This is the job of the fracture table, also known as an orthopedic table or traction table. It is one of the most specialised pieces of equipment in an operation theatre, and choosing well makes a direct difference to surgical outcomes and theatre efficiency.
What Is a Fracture Table?
A fracture table is an operating table fitted with traction attachments that hold and pull the injured limb into the correct position. The patient’s body rests on the main tabletop, while the legs are secured in boots or traction devices that can be adjusted in several directions. This allows the surgeon to reduce the fracture, keep it aligned and take clear X-ray images during the procedure.
Fracture tables are commonly used for hip fractures, femur nailing, tibia fractures and some pelvic procedures. In many hospitals, the fracture table is a standard OT table with a dedicated orthopaedic attachment, rather than a completely separate table.
Why the Right Orthopedic Table Matters
- Accurate reduction: Controlled traction helps align the bone before fixation.
- Stable positioning: The limb stays in place for the whole procedure, reducing the need for an assistant to hold it.
- Better imaging: A well-designed table gives the C-arm clear access, so the surgeon can check alignment quickly.
- Shorter surgery time: Less time spent repositioning means shorter anaesthesia time for the patient.
Key Features to Look For
1. Traction mechanism
Check how fine and smooth the traction adjustment is. Surgeons need to apply and release traction in small, controlled steps. Look for secure locks that do not slip under load.
2. C-arm access
Imaging is essential in fracture surgery. The table and attachments should allow the C-arm to move freely for both front and side views without hitting the base or the traction bars.
3. Radiolucent components
Parts in the imaging area, such as the perineal post and tabletop sections, should be radiolucent so they do not block the X-ray view.
4. Range of adjustments
The leg spars should move up and down, side to side and rotate, so the surgeon can position the limb for different fracture types. Height adjustment and tilt of the main table add more flexibility.
5. Patient safety and comfort
Padded boots, a well-cushioned perineal post and secure straps protect the patient’s skin and nerves during long procedures.
6. Compatibility with your existing tables
If you already own an electric or electro-hydraulic OT table, ask whether a fracture attachment can be fitted to it. This can be more cost-effective than buying a separate table, especially for hospitals with a moderate orthopaedic caseload.
Fixed Fracture Table or Attachment?
High-volume trauma centres often prefer a dedicated fracture table because it is always ready for orthopaedic cases. Smaller hospitals and multi-speciality theatres usually choose an orthopaedic attachment for an existing table, which saves space and money. The right choice depends on how many fracture cases your theatre handles each week.
Care and Maintenance
Fracture table attachments have many moving joints, locks and screws, so regular care keeps them accurate. After each case, clean the boots, perineal post and spars with a hospital-approved disinfectant and check the padding for wear or tears. Inspect the traction screws and locking handles every month to make sure they move smoothly and hold firmly. Store the attachments on a dedicated trolley or wall rack so that small parts are not lost or damaged between cases. A yearly service visit by the manufacturer helps catch loose joints or worn parts before they affect a surgery.
Staff training also matters. The theatre team should practise setting up the table and attachments before the first live case, so that patient positioning is quick and safe when it counts.
Questions to Ask a Fracture Table Manufacturer
- Which procedures is the table or attachment designed for?
- What is the maximum patient weight it can safely hold under traction?
- Which components are radiolucent?
- Does it fit our existing OT table, and is installation included?
- What training and service support do you provide?
Final Thoughts
A fracture table is a precision tool. Smooth traction, firm locking, clear imaging access and good patient padding matter far more than a low price. Before buying, ask for a demonstration with your orthopaedic team, check the imaging clearance with your own C-arm, and confirm service terms in writing. This guide to fracture table manufacturers in India covers what hospitals should check before buying and is a useful starting point for comparison.
